How Long Do Electric Razors Last?

This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Electric razors are convenient shavers that are taking over the grooming world, one person at a time.

While manual razors are still better, an electric razor can get the job done just as well.

Electric razors are slightly more complicated than manual razors, so this means that their lifespan is much higher.

If taken care of, electric razors should last a long time and require very little maintenance.

However, most people tend to neglect their electric razors.

We are here to help you out!

Electric razors have the potential to last years, but that means the owner needs to do a few things to make this happen.

What is the Typical Lifespan of an Electric Razor?

Depending on the brand you purchase, high-quality electric razors can last from 5-10 years. If you are proactive and care for it properly, it can even surpass 10 years. However, if you decide to not maintain it, it may last just a few months.

In order to maintain your razor’s longevity, it’s important to take proper care of it both during and after each shave. Keep in mind that long hair can be particularly damaging to the razor blades, potentially shortening its lifespan and requiring you to replace it sooner than otherwise.

Properly trimming your beard can actually help extend the lifespan of your razor, while using it on long, untrimmed hair can have the opposite effect. When it comes to purchasing electric razors, the old saying is true: you get what you pay for.

Investing in a higher-priced razor can be well worth the initial cost, as it will typically last longer and save you money in the long run.

Cheaper electric razors may be made with lower-quality materials and come with poor warranties, so it’s worth considering paying a bit more to have a razor that will last for several years. Trusted brands to consider include Remington, Braun, and Philips.

However, it is best to do your research well before deciding on a brand.

Tips to Prolong the Life of an Electric Razor

Clean your electric razor after each use

This means gently tapping the razor to allow hair or dead skin to fall out, rinsing it under the tap with warm, soapy water, and allowing the device to completely dry before storing or using it again. The biggest issue people have with their electric razors is that they do not spend time maintaining them; just like any mechanical device, they must be treated well in order to run smoothly.

Use a brush to clean it out once a week

Get a small brush that allows you to clean tight spaces. We recommend wetting the blades and brushing them under warm water to get started. Next, gently scrub all over with the brush to remove the build-up of hair, dead skin, and even lubricant. While lubricant is necessary to keep the shaver in top condition, it can build up and clog the blades or foils. A small brush can do a great job in helping you clean your electric razor so it can work at its best.

Never fully submerge your electric shaver in water

This is obvious. Not all shavers are waterproof placing your electric shaver underwater will destroy it. Avoid bringing your shaver in the shower, bathtub, or steam room at all costs. Moisture is extremely damaging to electric razors and it is easy to avoid.

Update blades and foils regularly

Keep track of when you last updated the blades or foils so that you can do it again at the same time in 12 months or 18 months. Dull blades or old foils do not perform well, so getting them replaced is necessary to allow your electric razor to shave the way it did when you first bought it.

Lubricate parts after each use

While this may be a tedious step, lubricating the parts of your electric shaver after each use is important to its longevity. All you need is a small amount of lubricant to make sure the parts are well-oiled. By lubricating the parts, you are helping them to run smoothly and efficiently during each shaving session.

Store the electric razor in a safe place

The worst thing you can do is shove your electric razor in a cluttered drawer or leave it in a place where it is exposed to heat or cold conditions. Instead, it would be a good idea to buy a case for it to store it in. The case can prevent the shaver from banging around and possibly breaking, as well as varying temperatures. When exposed to heat or cold, the electrical components of an electric shaver can deteriorate. If you are unable to find a carrying case or do not want to purchase a storage bag, try some bubble wrap and an elastic band to store it in.

Never clean the foils of the shaver with a brush

This can cause a lot of damage to the foils! To clean the foils, you can rinse them out or shake the hair or dead skin out. Brushes are too rough for the foils and can scratch and damage them. An electric razor will only last for as long as you spend maintaining it. If you don’t maintain the shaver for example, lubricating it, drying it after each use, and storing it in a safe and cool place, then it will not last long.

Electric razors are designed to last a long time, but they need to be maintained and cleaned consistently. An electric razor is very important for your shaving sessions. So, keep it well taken care of so that you can have it for a long time.

There is nothing worse than not knowing how to take care of your razor until it’s not working anymore. Keep the above tips in mind next time you purchase an electric razor.

3 thoughts on “How Long Do Electric Razors Last?”

  1. Hi, My name is Marguerite. I was given a “Lady Schick’ at my bridal shower. I love my shaver. I have used it ever since. My bridal shower was in Oct. 1977, yes…1977. Still works. Never had any work done to it. Same electrical parts. I just clean it with a little brush and put it up. I have put 43 years on this shaver. I think it might be the oldest one today still working. Glad to tell someone about it.

    Sincerely,

    Marguerite Ingiosi

  2. Thank you for this advice. My husband has Dementia and I am having to learn how to purchase and maintain a new electric razor.
    You have given me confidence to do this for him now

  3. I have been cleaning the head of my ancient Norelco model HP1121 with rubbing alcohol. I fill a shallow jar lid with rubbing alcohol, then run the razor with the head in the alcohol. All kinds of crud comes out. I do this about once a month. I don’t remember how long I’ve had this razor but at least 25 years. It was made in Holland. I can still get new heads on eBay. Does anyone out there know when the model HP1121 was manufactured?

Leave a Comment

Your email address will not be published. Required fields are marked *


Special offer for our visitors

Get your Free Shaving Guide

We will never send you spam. By signing up for this you agree with our privacy policy and to receive regular updates via email in regards to industry news and promotions