- What are razor burns?
- What is shaving irritation?
- How can you eliminate razor burns and shaving irritations?
- Prepare two hours in advance prior to shaving
- Cleanse and exfoliate your facial skin
- Trim challenging long hairs before getting to the main shaving session
- Wash your skin and let it dry after cleansing
- Lather your face with the correct gel
- Apply the appropriate settings on your electric shaver
- Use circular shaving maneuvers and motions
- Relax your hair or beard
- Place only light pressure on the shaver
- Beware of close shaves
- Adjust your cutting angles regularly
- Avoid aftershaves loaded with alcohol
- Practice clean shaving
- Fine-tune your shaving technique
- Replace your blades regularly
- Adhere to responsible and regular shaving
- Be mindful of your post-shaving routine
- Conclusion
Many men who use razor blades to shave their facial hair and beards suffer from razor burns and skin irritations. If you are a part of this category of men even though you use an electric shaver read on because we have some tips and tricks that may help you avoid these skin problems.
Here are some factors that may cause skin irritation dry shaving, aggressive shaving, and the use of dull blades. There are some things that you can do in advance to help avoid these types of skin issues that may happen from shaving.
This article is going to reveal some suggestions you can use to prevent razor burns and skin irritation from using electric shavers.
What are razor burns?
Razor burns are the reddish, nodular, and tender patches around your surrounding skin surface. This may happen after shaving. They can also include bumpy, and red blotches. Razor burns would most likely affect you if you have sensitive skin or bad shaving hygiene. To avoid razor burns you should follow good pre-shaving preparations and use proper hygienic practices. And it’s very important you use a reliable electric shaver always.
What is shaving irritation?
Shaving irritation is a stressful skin issue that happens on the cheeks and chin after shaving. They are in the form of tender soreness, red erythema, and feel like a burning sensation after shaving. This type of skin irritation along with razor burns is often the result of using a dull shaver or applying the wrong shaving technique. Because these issues can occur you need to know what to do to help you avoid this type of problem.
So, here are some great guidelines you can follow to decrease any shaving irritations and razor burns that may come up from shaving.
How can you eliminate razor burns and shaving irritations?
Prepare two hours in advance prior to shaving
When you shave you put the skin where your beard grows through a lot of stress and trauma. Preparing two hours in advance will allow your skin plenty of time to relax. Also, you can decrease skin irritation, and avoid redness, and burning tenderness that can happen from dry and aggressive shaving. As a result, making it a much better experience.
Cleanse and exfoliate your facial skin
As a first step, make time to do facial cleaning that involves an intense cleanse, thorough washing, and extensive exfoliation. Exfoliating can help remove dead skin cells and infectious bacteria while raising ingrown hairs from deep layers to the surface at the same time. Doing light and gentle exfoliation will open your pores. This step can help protect from razor burns.
Trim challenging long hairs before getting to the main shaving session
Often the location of these nasty and elongated beard hairs that need prior trimming before shaving is located in the lower jawline (mandible), frontal neck, and posterior chin region. Using either a single blade or a pair of scissors, you can cut off these clusters. Once done, you will have an easier time using the electric shaver to shave without risking longer hairs getting caught in the shaver which can cause trauma and skin irritation.
Wash your skin and let it dry after cleansing
You should cleanse your skin before shaving. But, after this, you need to wait a few minutes for the cleansed area of the skin to dry before running the electric shaver on it. This step is necessary to help decrease the possibility of an uneven surface from moist skin. Your dried skin should provide a smooth surface for the effortless use of an electric shaver. This can help you avoid any chances of irritation.
Lather your face with the correct gel
When you decide to take a wet shave, make sure that your choice of gel or shaving foam does not cause your skin to react in a bad way after you apply it. Try as much as possible to avoid any lathering products that could be responsible for causing excessive dry skin. For you to be on the right track, you may have to sample, test, and try out products before committing to one.
Apply the appropriate settings on your electric shaver
It’s important to have your electric shaver on the right settings. This can ensure it works for the shave length you want. The correct settings can provide you with control over specific shaving features such as speed and pressure, as a result allowing you to decrease any possible skin irritation. Due to the odds of that happening, always make sure that you fix your electric shaver to the sensitive and less aggressive settings before you begin shaving.
Use circular shaving maneuvers and motions
First, you’ll need a rotary electric shaver to do this particular tactic. Use your rotating shaver to shave in a circular motion that is similar while shaving your beard at the same time. Keep an eye on maintaining a circular motion into somewhat smaller sizes as you ensure the complete coverage of your bearded facial areas. This way you can trap the hairs that grow in a variety of directions to minimize any risk of hairs getting caught. You should consider doing this process often to get rid of any turf on your facial hair.
Relax your hair or beard
You should make softening and relaxing your beard hair before shaving with an electric shaver part of your routine. Using your shaving brush, you can apply any hair-softening products such as gels, lotions, or cream to your hair and leave it in for a couple of minutes. After a few minutes, your hair should be soft enough to allow for an easy shave while protecting your skin from any potential razor burns.
Place only light pressure on the shaver
While shaving your face always remember to place light and gentle pressure on your electric shaver. When you do this you’ll avoid friction and pressure on your skin. With less friction, the chance of developing skin irritation is gone. Remember to apply gentle pressure throughout the entire shaving session.
Beware of close shaves
A very close shave can cause skin irritation because of the added pressure on the shaver to cut tiny hairs. If this is something you do often you will definitely get irritated skin. Avoid forcing your electric shaver into your skin surface for close shaves all the time.
Adjust your cutting angles regularly
To avoid irritation and achieve a smooth shave, there are a few key techniques to keep in mind. First, consider adjusting your cutting angles regularly to prevent accidental irritations. Applying a mild tug or stretching your skin can also help you reach those hard-to-reach areas.
Avoid aftershaves loaded with alcohol
When it comes to aftershaves, be sure to avoid ones that are alcohol-based, as they can dry out your skin and make it more likely to get irritated. Go for alcohol-free options instead.
Practice clean shaving
Maintaining clean shaving practices is also crucial to avoiding irritation. Clean your electric shaver after every use and rinse it in lukewarm water. Let it dry off completely before storing it in a clean, dry place.
Finally, improving your shaving technique can help you achieve a smooth shave without causing irritation. Consider switching to a rotary electric shaver, which can reach hair from a variety of angles without scraping the surrounding skin. Remember to apply only light pressure when running your shaver across your skin to prevent trauma.
Fine-tune your shaving technique
Are you struggling with razor burns and looking for ways to improve your shaving technique? While manual razors have a reputation for scraping at the surrounding skin surface repeatedly, leading to razor burns, there’s a solution to this problem.
Switching to a rotary electric shaver and using a circular motion can help you easily reach previously inaccessible hair tufts and stragglers while avoiding the risk of razor burns.
Replace your blades regularly
To get the best results with your electric shaver, remember to apply only light pressure when running it across your skin. This will prevent trauma to the underlying layer and ensure a smooth, effortless shaving experience.
Additionally, make sure to replace your electric shaver’s blades regularly to avoid pulled hair strands, torn hair roots, and grazed skin surfaces that can lead to razor burns. Proper maintenance of your electric shaver is also crucial to keep it in an excellent working condition almost always.
To ensure that your electric shaver operates smoothly, you need to make a few technical adjustments. This includes replacing worn foils with functional ones, checking the battery power to ensure it’s sufficient for operating the shaver, and lubricating the blades and foils when needed. If you don’t make these corrections, your shaver will continue to pull and tug at your hair, causing irritation to your skin.
Adhere to responsible and regular shaving
If you want to maintain healthy skin while shaving, it’s important to adhere to a responsible and regular schedule. Shaving approximately three times a week is ideal because it allows enough time for your skin to heal or rejuvenate from your previous shave. Additionally, this prevents your facial hair from growing too long, which can lead to skin irritations caused by frequent and pressurized shaving. By following these guidelines, you can avoid any potential risks and enjoy healthy, smooth skin.
Be mindful of your post-shaving routine
If you use an electric shaver, it’s essential to follow a specific set of steps to prevent razor burns and irritations. To make sure you have a smooth and painless post-shave experience. You must follow these four steps:
- If you want to ensure that your skin remains healthy and free of dirt and lotion chemicals, it is recommended that you cleanse your face with cold water. The coolness of the water also has a soothing effect on your skin, which can be particularly beneficial if your skin was irritated.
- It’s important to dry your face gently by patting it with a clean towel, as rubbing the fabric across your skin may cause irritation, especially if your skin is still fragile.
- To prevent any potential irritation from the scouring action and drying effect of alcohol-based aftershaves, it’s important to use alcohol-free alternatives. These bland alternatives are less likely to cause irritation, so be sure to avoid letting chemically potent compounds come into contact with your freshly shaved face.
- Lastly, avoid exposing your face to warm water after shaving as your skin may still be sensitive and fragile.
Conclusion
There you have it. From the above pointers, you must now understand the different ways by which you can prevent skin irritation and razor burns from your electric shaver. As outlined, the use of electric shavers comes with additional responsibilities to ensure your skin remains healthy, especially during the shaving process.
From the above narrative, three actions are core factors in causing razor burns and irritations. These inadvisable risks include your use of the electric shaver while applying significant manual pressure, shaving your facial hair under dry skin conditions, and the use of an electric shaver containing blunt blades.
Therefore, the onus is upon you to manage your exposure to potential risk factors and prevent the manifestation of skin irritation and razor burns. However, if you cannot apply the relevant mitigating measures responsibly, you could always grow a full beard.
(new version) This guide outlines the various ways you can prevent skin irritation and razor burns while using an electric shaver.
It highlights three actions that are major contributors to razor burns and irritations: using an electric shaver with blunt blades, applying significant manual pressure, and shaving your facial hair under dry skin conditions.
By managing your exposure to these risk factors, you can keep your skin healthy during the shaving process. However, if you are unable to take the necessary precautions, you may consider growing a full beard.