Clicky

How To Get a Close Shave with an Electric Shaver – Ultimate Guide

First, gone are the days when visiting the barbershop meant being at the mercy of a stranger’s hair expertise. Also, we no longer run around with those nasty and awful manual razors whose practical uses should have been nowhere close to our beards and mustaches.

In our current society, you can choose from a variety of electric shavers, depending on your fancy. Anyhow, for you to get a close shave with an electric shaver, you principally need to accomplish a couple of minor changes to your shaving routine and equipment handling.

With this article, you will get an outlook at the alterations to your shaving habits from pre-shaving preparation to the post-shaving face cleaning. Alongside your adjustments, you will have a look at how you should handle your electric shaver from the shaving process to its future maintenance.

All these aspects contribute towards the achievement of a close shave in many diverse ways, as elucidated below. So, with your keen attention, this piece should offer you a different perspective on electric shavers and their significance in attaining a close shave

How can you achieve a close shave?

For you to achieve a close shave with an electric shaver, following a sensible strategy or course of action is imperative. For an outline of your requirements, here is a variety of the recommended steps:

  • Ensure a fully charged electric shaver is at hand before your scheduled shaving time.
  • Cleanse your face after shaving to avoid a puffed-up look otherwise. Choosing to wash your face initially will hamper shaving subsequently due to the resulting facial swelling.
  • Before subjecting your facial hair to an electric shaver, trim your overgrown bristles. Transform this routine into a regular habit, especially after a period of cultivating an unshaven mustache or beard.
  • Keep in mind the fact that electric shavers are excellent at dissociating the hair from the underlying skin before snipping it off. Unlike manual blades or razors, an electric shaver is capable of cutting off your hair at close quarters if handled well. Hence, from here on, get ready to stick to a relatively rigid routine.
  • Commence your shave responsibly. For instance, after switching your shaver on, identify your sensitive facial areas. Next, for an even slide without any bumpy rides, extend your skin out using your other hand as you pass the shaver through.
  • While shaving, make sure to handle your electric shaver in an upright stance to your skin. Also, run the shaver counter to the natural alignment of your beard, i.e., shave against the hair grain.
  • To keep irritation and potential razor burns at bay, do not repeat shaving the same region endlessly. Due to human intuitive reflex, this risk is surprisingly probable whenever you seek a closer shave.
  • Regulate your shaving pressure uniformly all through the routine. Beware of applying too much force in a misguided effort to achieve the nearest trim to your skin as possible.
  • Carry out proper care and maintenance of your electric shaver. Remember to clean your equipment appropriately and diligently after each shaving session. Further, for regular maintenance, you have to ensure proper lubrication and blade sharpness is in place at all times.

With the outline elucidated above, you may take it as a set of exclusive recommendations. However, this assumption is not necessarily the case. A majority of these suggestions, as well as other often-overlooked core principles, fall into three major categories:

  • Pre-shaving stage

This particular stage is fundamentally your preparation phase, and hence you should take it as such. Gaining the perfect close shave begins with comprehensive planning in this step.  Similar to lacking a preliminary schedule entirely, following an inadequate pre-shaving approach is calamitous as well.

Make sure to have a proper strategy in place well in advance while ensuring its sensibility, logic, and enforceability. For you to meet your shaving objectives, eventually, an excellent first stage is highly crucial. So, you may wonder, what does the pre-shaving step entail?

Firstly, set a fixed time interval for you to carry out electric shaving regularly. This plan should minimize the probability of missing trimming your excessive and neglected facial shrub. You should decide on an interval to which you are most likely to adhere.

Next, you have to decide on the kind of electric shaver you would need to attain your close shave result. In this case, you have a choice between two options: foil-based or rotatory shaver. Prudently, the foil option is advisable as opposed to the rotatory shaver due to the former’s superiority in achieving close shaves.

Seek the perfect electric shaver for the best results in achieving your desired close shave. Ideally, many brands of shavers will catch your attention, but you need to discern the best choice, preferably based on user reviews and performance traits.

Examples of two of the most trusted, well-reviewed, and superb shaving appliances for a close shave are the Panasonic, Philips and Braun electric shavers. Note that the essential qualities that make for an excellent close-knit electric shaver include a sturdy and robust motor as well as a top-performing, high caliber, sharpened blades.

Check the power status of your electric shaver. This process demands that you ensure your electric shaver has a full charge before commencing the definitive hair cutting. With more experience, you should come to determine your battery status based on the kind of motor throttle sounded by your electric shaver.

A low powered device would emit an audible strained motor sound that is distinguishable from a well-charged electric shaver. With a poorly charged electric shaver, the blades will not operate at optimal capacity, hence compromising your aspiration for a close shave.

  • In-shaving session

At this stage, you are in the actual shaving routine. This stage involves the definite act of cutting your hair with the help of your electric shaver. By following the correct maneuver and technique, you should achieve a close shave with relative ease.

For an excellent close shave, you ought to choose wet shaving over the dry option. Since dry shaving has a much higher risk of causing irritations, razor burns, and skin bumps, a shaving gel provides you with protection against these predicaments.

By wet shaving with a relevant cream, you should attain a smooth glide while running the electric shaver against your skin for a perfectly close shave eventually. Not only is the cream’s lubrication unlimited to softening your hair per se, but it is also responsible for greasing the shaving blade, thereby eradicating skin friction and local heat.

Given these additional benefits, when you lather your shaving gel, you ought to get a close shave rather comfortably.

Not all persons can stand or respond favorably to wet shaving. Depending on your personal preference and other subjective factors, you may not tolerate lathering up just before shaving. If you fall into this category, your other option towards attaining a close shave is by applying an electric pre-shave lotion.

Similar to the wet shave cream and gel, this lotion offers low-resistance lubrication to ease the electronic shaving process. By solidifying your shaved hairs into rigid strands, this lotion is responsible for allowing the electric shaver to achieve the close shave you desire.

In addition, this deployment enables you to get rid of skin moisture over the shaved area that typically hinders a close shave.

During the act of shaving, you may need the assistance of an extra hand to bring your low-lying hairs close to the blades for shaving. At this stage, your chance of achieving a close shave depends on stretching out your skin surface manually to enable your electric shaver to gain access to the short hair strands.

In addition, when committing to such close shaves, you should operate your electric shaver in the opposite direction to the hair alignment. In this manner, the counter direction makes it easier for the blades to shave off most of the low hair strands and wisps.

Along with close shaving against the grain of your hair growth, you ought to be mindful of applying undue pressure when running your electric shaver over your skin. The best way to achieve an ideal close shave is by using gentle shaving pressure uniformly across the facial region under shaving.

Note that too much force runs the risk of causing trauma to the underlying skin and compromising your desired close shave.

  • Post-shaving phase

Once done with getting rid of your excessive facial hair, your post-shaving errands principally call for final cleaning, after shaving and equipment maintenance. With a conscientious adherence to the previous steps, your final phase ought to conclude with the attainment of a close shave.

Moreover, a proper post-shaving commitment allows you to get a head start on your next shaving session. All the electric shaver maintenance and storage chores serve to act as advanced equipment preparations.

To continue accruing the benefits of a close shave, you must clean your electric shaver correctly and appropriately. At the end of your shaving session, your shaver would typically contain chunks and wisps of cut hairs attached to its various moveable parts. For instance, hair entanglements could feature within the foils, motor rotors, or shaving blades.

By conducting equipment cleaning, you will extend the longevity of your blades hence maintaining their viability for close shaving. Besides, the stuck strands of hair decrease the efficiency of your electric shaver by impairing its smooth operation and performance.

To get rid of physical dirt and reduce the operational load on the motor, you should employ the use of cleaning sprays and lubricants in your cleaning exercise. With spray cleaners such as Remington Shaver Saver, you would improve the efficiency of your electric shaver while allowing for more extended service in close shaving at the same time.

Lubrication is another mode of maintaining your electric shaver to prevent the jamming of the motor, blades, and other moveable parts.

With a majority of manufacturers, the cleaning instructions come together with the electric shaver on purchase. Therefore, if in doubt regarding cleaning your shaver, please consult the instruction pamphlet that came with the package. The act of cleaning your electric shaver is vital for long-lasting equipment and extended close shaving services.

Through maintenance, you should check on the status of your blade’s fixation and attachment to its platform. For a regular series of close shaves, the strength of this attachment is crucial as it determines whether your blades can withstand the strain of shaving hair so close to their bases.

With a weak connection, you ought to repair this joint and restore it to its optimum functionality. Without these corrective measures, the gadget is likely to deteriorate even further and become useless during your next session of close shaving.

Another essential component of the maintenance of your electric shaver is the replacement of worn-out blades and foils. You need to establish a regular interval within which you would change and swap these two parts for newer substitutes to keep your shaver in tip-top condition for close shaves. The state of your blades and foils has a direct influence on the performance of your electric shaver in a close shave.

Conclusion

From the lengthy explanation above, you will notice that a myriad of aspects has to be in accord for your close shave objective to come true. Achieving a close shave depends on both human and instrument factors being in harmony always. Carrying out regular maintenance on your electric shaver, as well as modifying your pre-shaving and post-shaving routines appropriately are imperative.

With these prerequisites settled, you should be free of avoidable inconveniences such as non-viable blades, overheating motors, and worn out foils that all result in an inability for a close shave eventually. In addition, the regular lubrication allows for comfortable handling of the appliance.

Therefore, if you adopt all the recommendations outlined here, you should continue benefitting from your close electric shaves. If you opted for the contrary, your shaver would run into frequent malfunctions and give in eventually. With that proposition, you should consider taking better care of your electric shaver for continued close shaves into the near future.

Leave a Comment

0 Shares
Share
Tweet
Pin
Share